点模式条件下的犯罪嫌疑人时空同现模式挖掘与分析     

李智  李卫红 《地球信息科学学报》2018,20(6):827-836

现有时空同现模式挖掘方法因其在空间和时间频繁阈值等参数值的设定上存在困难且缺乏客观依据的问题而难以被应用到犯罪地理研究中。为此,本文通过引入时空状态同现模式和最小时空参与率等概念对现有挖掘方法进行了重新建模,并结合广义Grubbs异常值检验提出了一种点模式分布下的犯罪嫌疑人时空同现模式挖掘框架。基于该框架对中国某省部分犯罪嫌疑人的真实移动轨迹数据的实验分析结果表明,本文所提出的方法能够有效地挖掘出嫌疑人间显著的时空同现模式,且这些模式的时空分布特征不仅与犯罪活动易发生在非农业生产区这一共识基本相符,还与日常活动理论的基本观点相适应。本文拓展了时空同现模式挖掘在犯罪地理研究中的应用,研究成果对公安机关等执法部门在重点监控某些犯罪嫌疑人以及合理分配和部署警力资源方面具有重要意义。  相似文献   

Closed-loop randomized kinodynamic path planning for an autonomous underwater vehicle     

《Applied Ocean Research》2019

A randomized kinodynamic path planning algorithm based on the incremental sampling-based method is proposed here as the state-of-the-art in this field applicable in an autonomous underwater vehicle. Designing a feasible path for this vehicle from an initial position and velocity to a target position and velocity in three-dimensional spaces by considering the kinematic constraints such as obstacles avoidance and dynamic constraints such as hard bounds and non-holonomic characteristic of AUV are the main motivation of this research. For this purpose, a closed-loop rapidly-exploring random tree (CL-RRT) algorithm is presented. This CL-RRT consists of three tightly coupled components: a RRT algorithm, three fuzzy proportional-derivative controllers for heading and diving control and a six degree-of-freedom nonlinear AUV model. The branches of CL-RRT are expanded in the configuration space by considering the kinodynamic constraints of AUV. The feasibility of each branch and random offspring vertex in the CL-RRT is checked against the mentioned constraints of AUV. Next, if the planned branch is feasible by the AUV, then the control signals and related vertex are recorded through the path planner to design the final path. This proposed algorithm is implemented on a single board computer (SBC) through the xPC Target and then four test-cases are designed in 3D space. The results of the processor-in-the-loop tests are compared by the conventional RRT and indicate that the proposed CL-RRT not only in a rapid manner plans an initial path, but also the planned path is feasible by the AUV.  相似文献   

废弃泥浆底部真空−上部堆载预压模型试验研究     

詹良通  张斌  郭晓刚  江文豪 《岩土力学》2020,41(10):3245-3254

针对工程泥浆回填废弃矿坑处置的安全问题，开展底部真空和上部堆载预压处理废弃工程泥浆的模型试验，探讨该技术在废弃矿坑回填处置工程应用的可行性。试验结果表明，底部真空和上部堆载预压使得泥浆含水率显著降低及泥土的强度明显提高，处理一个月后，含水率从初始450%降低至95%～105%，体积减量达到73.4%；不排水强度由初始为0的状态提高至9.8～13.4 kPa。在初始的静置阶段，泥浆颗粒沉积存在重力分异现象，粗颗粒在底部沉积有助于缓解真空预压过程中淤堵问题。底部真空作用下，泥浆中孔隙水渗流方向并非完全一维向下，在径向存在水力梯度。处理后泥土压缩性与软土相近，渗透性优于软土。基于试验结果和大应变固结理论，考虑泥浆的自重固结以及压缩性与渗透性的非线性变化，利用有限差分法分析了单次回填厚度对泥浆层固结时间和减量效果的影响，提出了现场实施的工艺参数建议。  相似文献   

鄂尔多斯盆地南缘黄陵地区煤铀兼探钻孔数据集成与三维地质模型构建          下载免费PDF全文

张云  张天福  孙立新  程银行  张祺  王少轶  程先钰  周小希 《中国地质》2020,47(S1):231-240

鄂尔多斯盆地南缘黄陵地区铀成矿前景良好。中国地质调查局在该地区组织实施了含铀岩系三维地质调查工作，以寻找可地浸砂岩型铀矿找矿靶区为目标，采用“煤铀兼探”、“油铀兼探”的新思路，对煤田钻孔资料进行“二次开发利用”，开展勘查选区研究，完成了354口煤田钻孔（其中筛选出潜在砂岩型铀矿（化）孔49口）和21口铀矿验证钻孔（其中工业矿（化）孔16口）的数据采集建库，在此基础上建立了专题成果图集及三维地质模型。该数据库主要由含铀岩系地层厚度等值线图、砂体厚度等值线图、顶底板埋深等值线图、含砂率等值线图、放射性异常等值线图等专题成果图集和三维地质结构模型组成，为铀矿勘探开发提供了有利支撑和服务作用。  相似文献   

筋土界面特性宏细观分析试验仪器研制与应用     

易富  杜常博  王政宇  于犇 《煤田地质与勘探》2020,48(1):174-182

为了更全面地分析筋土界面相互作用特性，改制了一台可视加筋土界面特性宏细观分析的试验仪器，可开展不同土工合成材料与填料的直剪和拉拔试验；该仪器改进了试验箱的尺寸，可方便两种试验的对比分析，增加了图像摄录系统，可进行试验过程的细观分析。使用新研制仪器分别进行了土工合成材料（土工格栅和土工布）加筋尾矿砂的直剪和拉拔试验，试验结果表明:两种试验条件下，土工格栅与尾矿的界面参数（似黏聚力和似摩擦角）及似摩擦系数均比土工布与尾矿的界面参数和似摩擦系数大；直剪试验下筋材网孔的有无对筋-尾矿界面参数均有较大影响，拉拔试验下筋材网孔有无对筋-尾矿界面参数似黏聚力的影响较为显著，对似摩擦角的影响较小。随着宏观变量法向应力的增加，细观参数孔隙率减小，平均接触数增加，反映在宏观上的现象就是填料颗粒被压密，筋材需要克服的阻力增大。该试验仪器能够较好地分析筋土界面宏细观特性，获得关键技术指标以用于加筋结构的设计。   相似文献   

A novel coupled FDM-DEM modelling method for flexible membrane boundary in laboratory tests     

Hua-Xiang Zhu  Zhen-Yu Yin  Qiang Zhang 《国际地质力学数值与分析法杂志》2020,44(3):389-404

Difficulties are involved in discrete element method (DEM) modelling of the flexible boundary, that is, the membranes covering the soil sample, which can be commonly found in contemporary laboratory soil tests. In this paper, a novel method is proposed wherein the finite difference method (FDM) and DEM are coupled to simulate the rubber membrane and soil body, respectively. Numerical plane strain and triaxial tests, served by the flexible membrane, are implemented and analysed later. The effect of the membrane modulus on the measurement accuracy is considered, with analytical formulae derived to judge the significance of this effect. Based on an analysis of stress-strain responses and the grain rotation field, the mechanical performances produced by the flexible and rigid lateral boundaries are compared for the plane strain test. The results show that (1) the effect of the membrane on the test result becomes more significant at larger strain level because the membrane applies additional lateral confining pressure to the soil body; (2) the tested models reproduce typical stress and volumetric paths for specimens with shear bands; (3) for the plane strain test, the rigid lateral boundary derives a much higher peak strength and larger bulk dilatation, but a similar residual strength, compared with the flexible boundary. The latter produces a more uniform (or ‘diffuse') rotation field and more mobilised local kinematics than does the former. All simulations show that the proposed FDM-DEM coupling method is able to simulate laboratory tests with a flexible boundary membrane.  相似文献   

北部湾地区海砂填料的动力特性分析     

王家全  陈胜前  唐毅  黄世斌  黄钦政 《海洋工程》2020,38(5):149-155

为研究北部湾地区海砂填料的动力特性，采用高级动态三轴测试系统开展循环荷载下的动三轴试验，研究不同围压及不同动应力幅值对海砂动力特性的影响规律。试验结果表明：轴向累计应变随围压增加而减小，围压150 kPa时振次10 000后应变仅为3%；随着动应力幅值的增大轴向累积应变随之增大，且达到破坏标准的时间越短。动弹性模量随着动应力幅值和围压的增加而增大，不同围压下动弹性模量随动应变的增加出现先骤减再略减后稳定的发展趋势，ε_d>0.3%后开始趋于稳定；不同动应力幅值下动弹性模量出现先增后减直至稳定的趋势，其中动应力幅值对动弹性模量有明显的影响，围压影响相对较小。孔压比随动应力幅值增加而减小，随围压增加而增加。  相似文献   

New graphical methods for estimating aquifer hydraulic parameters using pumping tests with exponentially decreasing rates     

Chao Zhuang  Zhifang Zhou  Hongbin Zhan  Jinguo Wang  Yabing Li  Zhi Dou 《水文研究》2019,33(17):2314-2322

Actual pumping tests may involve continuously decreasing rates over a certain period of time, and the hydraulic conductivity (K) and specific storage (S_s) of the tested confined aquifer cannot be interpreted from the classical constant‐rate test model. In this study, we revisit the aquifer drawdown characteristics of a pumping test with an exponentially decreasing rate using the dimensionless analytical solution for such a variable‐rate model. The drawdown may decrease with time for a short period of time at intermediate pumping times for such pumping tests. A larger ratio of initial to final pumping rate and a smaller radial distance of the observation well will enhance the decreasing feature. A larger decay constant results in an earlier decrease, but it weakens the extent of such a decrease. Based on the proposed dimensionless transformation, we have proposed two graphical methods for estimating K and S_s of the tested aquifer. The first is a new type curve method that does not employ the well function as commonly done in standard type curve analysis. Another is a new analytic method that takes advantage of the decreasing features of aquifer drawdown during the intermediate pumping stage. We have demonstrated the applicability and robustness of the two new graphical methods for aquifer characterization through a synthetic pumping test.  相似文献   

济南东部大辛河渗漏段地下水示踪试验与分析          下载免费PDF全文

丁冠涛  刘玉仙  曹光明  齐欢 《山东国土资源》2018,34(2)

2013年以来,济南市为正确处理好保泉和市民饮用优质地下水的关系,组织实施了地表水转换地下水补源系列工程,旨在补源保泉的前提下开采地下水。大辛河地表水转地下水工程是其中重要的组成部分,为了查明大辛河渗漏补源后地下水的补给方向、径流速度等,在大辛河主要渗漏段开展了地下水示踪试验。结果显示:地下水渗漏补源后沿渗漏段—龙奥大厦—济南东区供水奥体加压站—贤文小区一线大体自南向北径流,视径流速度约45m/d,越往两侧流速越缓慢,表明大辛河地表水转地下水工程主要对东郊水源地进行补给,对市区四大泉群补给较弱。示踪试验得出的结论,对大辛河地表水转地下水工程运行具有重要指导作用,对后期管理部门合理规划补源、开采布局具有重要的借鉴意义,促进济南保泉和供水的有机统一。  相似文献   

Inference of in situ stress from thermoporoelastic borehole breakouts based on artificial neural network     

Hua Zhang  Shunde Yin 《国际地质力学数值与分析法杂志》2019,43(16):2493-2511

The determination of in situ stresses is very important in petroleum engineering. Hydraulic fracturing is a widely accepted technique for the determination of in situ stresses nowadays. Unfortunately, the hydraulic fracturing test is time-consuming and expensive. Taking advantage of the shape of borehole breakouts measured from widely available caliper and image logs to determine in situ stress in petroleum engineering is highly attractive. By finite element modeling of borehole breakouts considering thermoporoelasticity, the authors simulate the process of borehole breakouts in terms of initiation, development, and stabilization under Mogi-Coulomb criterion and end up with the shape of borehole breakouts. Artificial neural network provides such a tool to establish the relationship between in situ stress and shape of borehole breakouts, which can be used to determine in situ stress based on different shape of borehole breakouts by inverse analysis. In this paper, two steps are taken to determine in situ stress by inverse analysis. First, sets of finite element modeling provide sets of data on in situ stress and borehole breakout measures considering the influence of drilling fluid temperature and pore pressure, which will be used to train an artificial neural network that can eventually represent the relationship between the in situ stress and borehole breakout measures. Second, for a given measure of borehole breakouts in a certain drilling fluid temperature, the trained artificial neural network will be used to predict the corresponding in situ stress. Results of numerical experiments show that the inverse analysis based on finite element modeling of borehole breakouts and artificial neural network is a promising method to determine in situ stress.  相似文献